檢測報告圖片模板

【英文標準名稱】: Solar energy - Methods of testing preformed rubber seals and sealing compounds used in collectors

【原文標準名稱】: 太陽能 用于集熱器橡膠密封件和塑料密封材料的試驗方法

【標準號】: ISO 9553-1997

【標準狀態】: 現行

【國別】: 國際

【發布日期】: 1997-11

【實施或試行日期】:

【發布單位】: 國際標準化組織(IX-ISO)

【起草單位】: ISO/TC 180

【標準類型】: ()

【標準水平】: ()

【中文主題詞】: 密封件;密封結合物;規范(驗收);橡膠連接;試驗;太陽能集熱器;太陽能收集器;太陽能加熱;太陽能;物理性能

【英文主題詞】: Physical properties;Rubber joints;Sealing compounds;Seals;Solar collectors;Solar energy;Solar heating;Specification (approval);Testing

【摘要】: 1 This International Standard gives requirements for the classification and testing of rubbers used to seal solar energy collectors in order to aid selection for specific applications.NOTE Particular rubber applications, when specified, may necessitate other requirements that take precedence over these requirements.2 The design requirements in this International Standard pertain only to permissible deflection of the rubber during thermal expansion or retraction of the seal in use and to the tolerances on dimensions of moulded and extruded seals.3 This International Standard does not include requirements pertaining to geometrical design, fabrication or installation of the seals.4 This International Standard is applicable in conjunction with long-term ageing and weathering tests. However, if long-term tests are performed, it is recommended that ISO 4892-2 be complied with for ageing tests and ISO 877 for accelerated weathering tests and material exposure tests, respectively.NOTE The environmental conditions, test specimen configuration and any test deviations should be agreed upon between the parties involved. Also, if long-term tests are performed, the specific tests described in this International Standard should be performed before and after long-term testing is carried out.

檢測項目及標準

序號 檢測標準 檢測對象 檢測項目 1 太陽能 用于集熱器橡膠密封件和塑料密封材料的試驗方法 ISO 9553:1997 集熱器橡膠密封件和塑料密封材料 硬度（國際橡膠硬度標準） 2 太陽能 用于集熱器橡膠密封件和塑料密封材料的試驗方法 ISO 9553:1997 集熱器橡膠密封件和塑料密封材料 拉伸強度和斷裂伸長率 3 太陽能 用于集熱器橡膠密封件和塑料密封材料的試驗方法 ISO 9553:1997 集熱器橡膠密封件和塑料密封材料 壓縮形變 4 太陽能 用于集熱器橡膠密封件和塑料密封材料的試驗方法 ISO 9553:1997 集熱器橡膠密封件和塑料密封材料 耐熱性 5 太陽能 用于集熱器橡膠密封件和塑料密封材料的試驗方法 ISO 9553:1997 集熱器橡膠密封件和塑料密封材料 抗臭氧性 6 太陽能 用于集熱器橡膠密封件和塑料密封材料的試驗方法 ISO 9553:1997 集熱器橡膠密封件和塑料密封材料 耐低溫性 7 太陽能 用于集熱器橡膠密封件和塑料密封材料的試驗方法 ISO 9553:1997 集熱器橡膠密封件和塑料密封材料 粘附損耗

溫馨提醒：以上內容僅供參考，更多檢測資訊，請加微信或直接電聯。